Foam moldings production process

First, foam moldings are light in weight. Its weight is approximately one sixth of that of GRC decorative lines. One person can move and build freely.
Second, the foam lines are firmly adhered. The safety of foam moldings (components) is of great significance, especially under the requirements of a lifelong quality system. If only beautification is emphasized while safety is neglected, it will bring about significant hidden dangers. EPS decorative moldings are not only lightweight and firmly bonded to the base wall, but mainly bonded to polymer mortar. Polymer mortar is made by adding organic glue to inorganic cement mortar and stirring it. It has a long service life, strong adhesion, and complies with national standards and regulations. A large number of engineering practices have proved that this method is feasible, safe and reliable. To avoid quality accidents caused by the use of anchor bolts for fixed construction and the potential corrosion of anchor bolts,
Third, the shape of the foam moldings can be processed freely. Due to the automatic cutting designed by computer, the pattern (moldings construction conditions) is arbitrary, the processing is simple and the installation is convenient.
Fourth, foam moldings are combined with EPS external insulation walls. Today, with the rapid development of building energy conservation, EPS board external insulation systems have become the preferred choice. However, architects are concerned about whether it will affect the realization of the facade effect. EPS decorative moldings completely allay architects' concerns. Not only that, but they also allow architects to freely design shapes and form a good match with the external insulation wall.
Fifth, foam moldings are easy to install. By using special bonding materials and methods, one person can carry out the installation and construction. Especially for larger components, only bonding and installation are required.
Six. The foam moldings are smooth and beautiful, with no gaps between the lines. Because gap repair material was used between the two lines, the gap completely disappeared. There will be no cracks in future use.
The advantages of foam moldings are that they solve the problem of cold and hot Bridges in external insulation, allowing designers and constructors to fully exert their capabilities.